Struvite Remover, Descaling Foam Application

Struvite Remover Foam Application

Struvite Removal now offers a foaming descaler where a liquid descaler won't match up.

When applied with a foaming solution:

• Easily apply to vertical surfaces, screens, outside of centrifuges, fin fans, food processing, etc.

• Easy to use and clean large areas quickly

• Foam adds increased efficiency and uses less product as compared to sprays or brush on products

• Reduced fumes and exposure compared to hydrochloric acid

• Wash away safely with water

Watch the video below, or refer to our youtube channel with this link:

Struvite Remover Foam Application

What is Tank Cleaning?

 What is Tank Cleaning?

Contaminants Mixed with Crude Oil:

1. Water
2. Sand and Dirt
3. Salts and Scale
4. Waxes
5. Asphaltene & Inorganic

Typical Sludge Profile

• 67% Oil
• 25% Solids
• 8% Water

Tank Cleaning is the Removal of this Oil Sludge

JP-SR Jayne Products Industrial Scale Remover

JP-SR is a low pH inorganic/organic salt solution that performs like an acid. This formulation replaces such acids as hydrochloric, sulfamic, phosphoric, hydroxyacetic, oxalic, citric, formic, and glycolic while offering significant performance advantages including:

 Biodegradable

 Less-Hazardous

 Non-corrosive (to skin and metal per DOT/OSHA/EPA test protocol)

 Non-Fuming

 Outstanding safety, handling, and performance properties vs. traditional acids

 VOC Less than 15 grams per liter

JP-SR has been used in many Wastewater Treatment Plant applications to remove struvite blocked pipes, Transit Authority for removing scale, and can be used for nearly any scale removal including cooling towers.

JP-SR is a commercial alternative for industrial users that is biodegradable, less hazardous, non-corrosive and safe for personnel.

Tank Cleaning can be Completed Safely and Cost-Efficiently

Chemical Cleaning Turnkey Benefits

Chemical Cleaning Turnkey Benefits

-Reduce Cleaning Time
-Reduce Labor Costs
-Restore Equipment Capacity
-Promote Hydrocarbon Recovery
-Reduce Air Emissions
   -Reduce Danger of Explosive and Toxic Vapors by Lowering H2S & LEL Levels
-Provide Oil-Free Surfaces and Gas-Free Environment Ready for Entry
-Minimize waste
-Water has no impact on WWTP
-Water has Low BOD, COD, and TOC Levels (Dependent on the Sludge Characteristics)

Comparison of Different Tank Cleaning Methods

Comparison of Different Tank Cleaning Methods  Assumption : Tank Diameter 60 Meters, Crude Oil        Sludge Accumulation Average 8 cm*          Sludge Volume approx. 200 cu.m*                * Based on tank T5206 Cleaning
Cleaning Method	Manpower (man)	Equipment (day)	Time (day)	Total Man-Day	Percent Oil Recovery  (%)
l. Manual Cleaning	40	0	45	1800	0
2. Mechanical Equipment and    Manual (Steaming and Water Jet)	25	25	25	625	0
3. Warm Water Method using     Chemicals	15	15	15	225	>90%
4. Robotic Mechanical Equipment    with Liquid/Solid Separation	20	15	15	300	70-80%

Power Wash Steam Soap, AQMD Industrial Degreaser

Power Wash- Steam Soap 2 is a concentrated, non-hazardous, non-caustic, non-flammable, biodegradable, and versatile degreaser for industrial and institutional applications. It dissolves and removes road grime, oil, carbon, dirt, etc. 

Power Wash- Steam Soap 2 is formulated to remove compressor lube oils and other oils from refinery facilities. It is safe on paint and vehicle surfaces. 

Power Wash- Steam Soap 2 currently has an AQMD Clean Air Choice Cleaner certification which is a very stringent certification that only cleaners with very low VOC and toxicity can qualify. Jayne Products offers delivery in bulk (in the local area), totes or 55 gallon drums. Power Wash- Steam Soap is currently used by another large transit system and local refineries and has been for over 15 years.

Directions: Power Wash – Steam Soap 2 may be used in a concentrate form or diluted with cold or hot water. The dilution ratios should be adjusted according to the degree of grime and grease deposits. Brush on and allow to work for 10 to 15 minutes before rinsing.